When you invest in the Green Homeowner’s Club, we will provide you with two free seasonal maintenance services, one in the spring and one in the fall: an air conditioning precision tune-up and a heating combustion adjustment plus professional cleaning, and safety inspection.  Plus we include the Filters at no extra charge.

There are three plans to choose from, Platinum, Gold and Silver. All plans can be order securely online in our store.

Each plan has many benefits to choose from such as discounts on services, priority services and even free repairs with our extended Platinum service option.

Here is some of the types of inspection items included with our maintenance services...

All Services are priced for seasonal services; we perform services on your heating system in the fall and your cooling system in the spring, you also have the option a maintenance service for both systems at once.

Clean Burner Assembly to improve combustion, reducing waste heat

Tune Burners for more efficient burns, saving energy

Clean Ignition Assembly to ensure reliable operation on demand

Clean & Inspect Furnace Heat Section to ensure safe operation and the absence of cracks from metal fatigue

Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction

Inspect Flue Pipe to ensure no corrosion is present which can lead to cracks and the introduction of dangerous fumes into your home

Calibrate Thermostat for accurate control and to prevent system from running longer than necessary, increasing utility usage

Test Refrigerant Charge to ensure optimum levels leading to lower utility usage and extend compressor life

Test Capacitors to ensure reliable operation and continued compressor and motor protection

Test Crankcase Heaters to ensure proper compressor protection

Inspect & Test Controls & Safeties to keep operating costs low and prevent failures

Adjust Fan Switch to prevent wasted energy and excess sound levels from nuisance cycling

Clean or Replace Filters to reduce energy use, reduce compressor strain, improve indoor air quality, and Improve comfort

Clean & Adjust Blower Assembly to extend motor life, improve air quality, and reduce sound

Check Air Flow to ensure proper air flow across the coil for proper humidity removal and reliable operation

Visually Inspect Ductwork to identify obvious leaks, which reduce system efficiency and increase utility expense

Tighten Electrical Connections to ensure uninterrupted system operation

Measure & Record Voltage & Amperage to identify baseline operating conditions

Lubricate All Moving Parts to maintain efficiency and extend equipment life